These settings are only for basic wireless parameters. For advanced settings, please refer to
5.6: "Wireless".
Step 5. Click the Next button. You will then see the Finish page.
If you don't make any change on the Wireless page, you will see the Finish page as shown in
4-17. Click the Finish button to finish the Quick Setup.
Figure
If there is something changed on the Wireless page, you will see the Finish page as shown in
4-18. Click the Reboot button to make your wireless configuration to take effect and finish
Figure
the Quick Setup.
After the rebooting, please check whether you can access the Internet or not in the
Figure 4-17 Quick Setup – Finish
Figure 4-58 Quick Setup – Finish
-23-
User's Manual of WNRT-617
5.2 Status
Section
page.