Table of Contents
Advertisement
The page includes the following fields:
Object
Wireless Network Name
(SSID)
Region
Channel
Mode
Channel width
Enter a value of up to 32 characters. The same name of SSID (Service
Set Identification) must be assigned to all wireless devices in your
network. Considering your wireless network security, the default SSID is
set to be default. This value is case-sensitive. For example, PLANET is
NOT the same as planet.
Select your region from the pull-down list. This field specifies the region
where the wireless function of the Router can be used. It may be illegal to
use the wireless function of the Router in a region other than one of those
specified in this field. If your country or region is not listed, please contact
your local government agency for assistance.
When you select your local region from the pull-down list, click
the Save button, then the Note Dialog appears. Click OK.
Note:
Limited by local law regulations, version for North America does not have
region selection option.
This field determines which operating frequency will be used. The default
channel is set to Auto, so the AP will choose the best channel
automatically. It is not necessary to change the wireless channel unless
you notice interference problems with another nearby access point.
Select the desired mode. The default setting is 11bgn mixed.
11b only, 11g only, 11n only, 11bg mixed, 11bgn mixed.
It is strongly recommended that you set the Mode to 802.11b&g&n, and
all of 802.11b, 802.11g, and 802.11n wireless stations can connect to the
Router.
Select any channel width from the pull-down list. The default setting is
automatic, which can adjust the channel width for your clients
automatically.
-47-
User's Manual of WNRT-617
Description
Note Dialog
Advertisement
Table of Contents
