Planet WNRT-617 User Manual page 103

To add static routing entries:
Step 1. Click Add New... shown in
Step 2. Enter the following data:
Object
Destination IP Address
Subnet Mask
Gateway
Status
Step 3. Click the Save button to make the entry take effect.
Other configurations for the entries:
Click the Delete button to delete the entry.
Click the Enable All button to enable all the entries.
Figure 5-50, you will see the following screen.
Figure 5-51 Add or Modify a Static Route Entry
The Destination IP Address is the address of the network or host that
you want to assign to a static route.
The Subnet Mask determines which portion of an IP Address is the
network portion, and which portion is the host portion.
This is the IP Address of the gateway device that allows for contact
between the Router and the network or host.
Select Enabled or Disabled for this entry on the Status pull-down list.
Table 5-35
-96-
User's Manual of WNRT-617
Description