Introduction - MSI Eclipse Plus Series Manual

M S-7566 M ainboard

Introduction

DRIVER BOOSTER MANAGER offers RAID level 0 (Striping), RAID level 1 (Mirroring
and Duplexing) for SATA ports (SATA7/8 & SATA9/10) on this mainboard.
RAID 0 breaks the data into blocks which are written to separate hard drives. Spreading
the hard drive I/O load across independent channels greatly improves I/O performance.
RAID 1 provides data redundancy by mirroring data between the hard drives and
provides enhanced read performance.
Important
1.The least number of hard drives for RAID 0, RAID 1 mode is 2. All the
information/ volumes/ pictures listed in your system might differ from the
illustrations in this appendix.
2.SATA7 & SATA8 support RAID 0/ RAID 1 by 1st JMB322 (controller 1). And
SATA9 & SATA10 support RAID 0/ RAID 1 by 2nd JMB322 (controller 2).
D-2