Table of Contents
Advertisement
M S-7566 M ainboard
Back Panel
USB Ports
Mouse
Keyboard
Clear CMOS
Button
M ouse/Keyboard
®
The standard PS/2
Clear CMOS Button
There is a CMOS RAM on board that has a power supply from external battery to
keep the system configuration data. With the CMOS RAM, the system can automati-
cally boot OS every time it is turned on. If you want to clear the system configuration,
use the button to clear data. Press the button to clear the data.
Important
Make sure that you power off the system before clearing CMOS data.
1394 Port (optional)
The IEEE1394 port on the back panel provides connection to IEEE1394 devices.
eSATA Port
The eSATA port is for attaching the eSATA external hard drive.
LAN
The standard RJ-45 LAN jack is for connection to
the Local Area Network (LAN). You can connect
a network cable to it.
LED
Color
LED State
Off
Left
Yellow
On (steady state)
On (brighter & pulsing) The computer is communicating with another computer on the LAN.
Green
Off
Right
On
Orange
On
2-12
1394 Port (optional)
eSATA Ports
mouse/keyboard DIN connector is for a PS/2
Condition
LAN link is not established.
LAN link is established.
10 Mbit/sec data rate is selected.
100 Mbit/sec data rate is selected.
1000 Mbit/sec data rate is selected.
LAN
USB Ports
Debug LED
®
mouse/keyboard.
Yellow
Green / Orange
Advertisement
Table of Contents
