MSI Eclipse Plus Series Manual page 20

5. Visually inspect if the CPU is seated
well into the socket. If not, take out
the CPU with pure vertical motion and
reinstall.
7. Press down the load lever lightly onto
the load plate, and then secure the
lever with the hook under retention
tab.
Important
1. Confirm if your CPU cooler is firmly installed before turning on your system.
2. Do not touch the CPU socket pins to avoid damaging.
Hardware Setup
6. C over t h e l oad p l at e on t o t h e
package.
8. Inspect the four hooks are in porper
position before you install the cooler.
2-5