2. After the hardware installation is completed, power on the system and install the
NVIDIA ForceW are W indows Vista driver. Reboot the system, a NVIDIA Control
Panel will be provided for Multi-GPU control. Right click on windows desktop and
select NVIDIA Control Panel. Go to 3D Settings --> Set SLI configuration and
check Enable SLI technology (recommended). Then press Apply. (concerning
the details of multi-GPU settings, please refer to your graphics card manual).
Check the box
3. Go to 3D Settings on the top menu options, and check the Show SLI Visual
Indicators. It will show the SLI x3 lable and a scaling bar in fullscreen 3D
applications.
Important
If you want to quit the SLI function, make sure that you disable the "SLI
technology" function.
Hardware Setup
2-27