TP-Link T2500G-10MPS User Manual page 81

Managing System
Access
Interface
IP Address/
Mask
MAC Address
When the IP-based mode is selected, the following section will display.
IP Address
Access
Interface
Operation
When the Port-based mode is selected, the following section will display.
Port
2) Click Apply.
Select the interface to control the methods for users' accessing. The selected
access interfaces will only affect the users you set before.
SNMP: A function to manage the network devices via NMS.
Telnet: A connection type for users to remote login.
SSH: A connection type based on SSH protocol.
HTTP: A connection type based on HTTP protocol.
HTTPS: A connection type based on SSL protocol.
Ping: A communication protocol to test the connection of the network.
If you select IP-based mode, enter the IP address and mask to specify an IP
range. Only the users within this IP range can access the switch.
If you select MAC-based mode, specify the MAC address. Only the users with the
correct MAC address can access the switch.
Displays the IP range of the entry.
Displays the access interface you set of the entry.
Click Edit to modify the parameters of the desired entry.
Select one or more ports to configure. Only the users connected to these ports are
allowed to access the switch.
Access Security Configurations
Configuration Guide 57