Configuring GVRP
4) Click Save Config to save the settings.
Configurations for Switch 5
1) Choose the menu VLAN > 802.1Q VLAN > Port Config to load the following page. Set
the link type of ports 1/0/1-3 as Trunk.
Figure 3-8 Set Link Type for the Port
2) Choose the menu VLAN > GVRP > GVRP Config to load the following page. Enable
GVRP globally, then click Apply. Select ports 1/0/1-3, set Status as Enable, and keep
the Registration Mode and the values of the timers as default. Click Apply.
Configuration Example
Configuration Guide
262