TP-Link T2500G-10MPS User Manual page 705

Hide thumbs Also See for T2500G-10MPS:

Table of Contents

Configuring LLDP

Figure 6-2 LLDP Global Config

2) Choose the menu LLDP > Basic Config > Port Config to load the following page. Set

the Admin Status of port Gi1/0/1 to Tx&Rx, enable Notification Mode and configure all

the TLVs included in the outgoing LLDP packets.

Figure 6-3 LLDP Port Config

6.1.5 Using CLI

1) Enable LLDP globally and configure the corresponding parameters.

Switch_A#configure

Switch_A(config)#lldp

Configuration Example

Configuration Guide

Chapters

Table of Contents