TP-Link T2500G-10MPS User Manual page 447

Configuring Layer 2 Multicast
Demonstrated with T2500G-10MPS, this section provides configuration procedures in two
ways: using the GUI and using the CLI.
5.4.4 Using the GUI
1) Choose the menu Multicast > IGMP Snooping > Snooping Config to load the following
page. Enable IGMP Snooping globally, and keep the default values in the Router Port
Time and Member Port Time fields.
Figure 5-19 Configure IGMP Snooping Globally
2) Choose the menu Multicast > IGMP Snooping > Port Config to load the following page.
Enable IGMP Snooping on port 1/0/1-4.
Configuration Examples
Configuration Guide 423