TP-Link T2500G-10MPS User Manual page 558

Configuring ACL
Choose the menu ACL > ACL Config > ACL Create to load the following page.
Figure 2-3 Creating an ACL
Follow these steps to create an ACL:
1) In the ACL Create section, assign a name to the ACL
ACL ID
2) Click Apply to make the settings effective.
Note:
The supported ACL type and ID range varies on different switch models. Please refer to the on-
screen information.
2.1.4 Configuring ACL Rules
Add rules to the ACL. For details, refer to
Standard-IP ACL
Configuring the MAC ACL Rule
Choose the menu ACL > ACL Config > MAC ACL to load the following page.
Figure 2-4 Creating the MAC ACL
Enter a number to identify the ACL
Rule, and Configuring the Extend-IP ACL
.
Configuring the MAC ACL
Rule.
ACL Configuration
Rule, Configuring the
Configuration Guide 534