Advertisement
Scan for full manual
Step 1: Check what's in the box
WP-2UT USB Transmitter
PT-2UR USB Receiver
Step 2: Get to know your WP-2UT/R-KIT
WP-2UT
#
Feature
1
USB 2.0 Type B Port
2
LINK LED
3
ON LED
4
Ring Tongue Terminal Grounding Screw
5
SRV (Tx, Rx)
6
RS-232 (G, Rx, Tx)
7
Power Supply 2-pin Terminal Block
Connector
LINK POC ◄► OUT RJ-45 Connector
8
WP-2UT/R-KIT Quick Start
WP-2UT/R-KIT Quick Start Guide
This guide helps you install and use your WP-2UT/R-KIT for the first time.
Go to
www.kramerav.com/downloads/WP-2UT/R-KIT
firmware upgrades are available.
1
C-USB/AB-6
1 Power adapter and cord
Function
Connect to USB host.
Flashes blue when a link is established.
Lights green when locally powered by the power adapter.
Lights orange when powered by PoC.
Connect to grounding wire (optional).
5-pin Terminal Block
Connect for firmware upgrade.
Connector (with a
Connect for serial extension (9600 baud rate).
common G pin)
Connect to the power supply. Connect GND to GND, +12V to +12V.
Connect to the LINK IN port on the
via the receiver or the receiver by the device.
to download the latest user manual and check if
cable
Installation accessories
Frame set and faceplate
P/N: 2 9 0 0 - 3 0 1 4 1 1 QS
1 Bracket set
1 Quick start guide
PT-2UR
and to power either the device
Rev: 1
Advertisement
Table of Contents
Related Manuals for Kramer WP-2UT/R-KIT
Summary of Contents for Kramer WP-2UT/R-KIT
- Page 1 WP-2UT/R-KIT Quick Start Guide This guide helps you install and use your WP-2UT/R-KIT for the first time. Go to www.kramerav.com/downloads/WP-2UT/R-KIT to download the latest user manual and check if firmware upgrades are available. Scan for full manual Step 1: Check what’s in the box...
- Page 2 12V DC Power Connector Connect to the supplied power adapter. Step 3: Install the WP-2UT/R-KIT WP-2UT Insert the device into the in-wall box (note that first you need to connect the HDBT cable and power) and connect the parts as...
- Page 3 Step 4: Connect the inputs and outputs Always switch OFF the power on each device before connecting it to your WP-2UT/R-KIT. For best results, we recommend that you always use Kramer high-performance cables to connect AV equipment to the WP-2UT/R-KIT.
- Page 4 Brown / White connected/soldered to the connector Brown shield. To achieve specified extension distances, use the recommended Kramer cables available at www.kramerav.com/product/WP-2UT/R-KIT. Using third-party cables may cause damage! Step 5: Connect the power Connect the 12V power adapter to the...
Need help?
Do you have a question about the WP-2UT/R-KIT and is the answer not in the manual?
Questions and answers