Panasonic Lumix DC-BS1H Operating Instructions Manual page 215

■
Fn Button Assigned with [LAN / Wi-Fi]
You can perform the following operations by pressing the Fn button assigned with [LAN / Wi-Fi] during network connection.
● About Fn buttons ( 160
[Terminate the Connection]
[Change the Destination]
[Register the Current Destination
to Favorite]
[Network Address Display (LAN)]
[Network Address Display (Wi-Fi)]
● Depending on the function being used or the connection destination, you may not be able to perform some of these
operations.
● If you turn the camera off without terminating the network connection, when the camera is turned on next, it is
automatically reconnected with the previously connected network connection method.
● The camera's Wi-Fi connection, Bluetooth connection, and USB connection cannot be used while supplying power with
PoE+.
● Do not insert/remove the card or move to an area without any reception while a connection is being made.
● The camera cannot be used to connect to a public wireless LAN connection.
● We strongly recommend that you set an encryption to maintain information security.
● Images may not be completely sent depending on radio wave conditions. If the connection is terminated while importing
images, images with missing parts may be sent.
12. Remote Operations - About Remote Operation
/ Register Functions to the Fn
Terminates connection.
Terminates connection, and allows you to select a different connection.
Registers the current connection destination or method so that you can easily connect
with the same connection settings next time.
Displays the MAC address and IP address of the camera when connected with a LAN
cable. ( 248 / [Network Address Display
Displays the MAC address and IP address during Wi-Fi connection. (
[Network Address Display
Buttons)
(LAN)])
(Wi-Fi)])
- 215 - - 215 -
248 /