[Frame Marker]; Color Bars / Test Tone - Panasonic Lumix DC-BS1H Operating Instructions Manual

[Frame Marker]

A frame with the set aspect ratio is displayed on the recording screen.
This allows you to see during recording the angle of view that will be achieved with trimming (cropping) in post-processing.
[MENU/SET] [ ] [
[ON] Displays video grid lines on the recording screen.
[OFF]
Sets the aspect ratio of video grid lines.
[Frame Aspect]:
[2.39:1] / [2.35:1] / [2.00:1] / [1.85:1] / [16:9] / [4:3] / [5:4] / [1:1] / [4:5] / [9:16]
[Frame Color]:
[SET]
Sets the color of video grid lines.
Sets the outer side opacity of video grid lines.
[Frame Mask]:
[100%] / [75%] / [50%] / [25%] / [OFF]

Color bars / Test Tone

The color bars are displayed on the recording screen. A test tone is output while the color bars are being displayed.
[SMPTE]
[MENU/SET] [ ] [
Settings: [SMPTE] / [EBU] / [ARIB]
● To end the display, press [MENU/SET].
■
Adjusting the Test Tone
There are 4 levels ([–12dB], [–18dB], [–20dB], and [MUTE]) of test tone to select.
Rotate to select the test tone level.
● The color bars and test tone will be recorded on the video if video recording is started while the color bars are being
displayed.
● [Color Bars] is not available when using the following function:
– [HDMI RAW Data Output]
5. Recording settings - Main Assist Functions
] Select [Frame Marker]
[EBU]
] Select [Color Bars]
―
[ARIB]
- 109 - - 109 -