[Ss/Gain Operation] - Panasonic Lumix DC-BS1H Operating Instructions Manual

● When the following functions are being used, [E-Stabilization (Video)] is not available:
– 6K video/5.9K video/5.4K video
– [Variable Frame Rate]
– [HDMI RAW Data Output]
– [Live Cropping]

[SS/Gain Operation]

You can switch the units of shutter speed values and gain (sensitivity) values.
[MENU/SET] [ ] [
[SEC/ISO]
[ANGLE/ISO]
[SEC/dB]
● When [SS/Gain Operation] is set to [SEC/dB], menu names change as shown below:
– [Dual Native ISO Setting]
– [ISO Sensitivity (video)]
– [ISO Auto Lower Limit Setting]
– [ISO Auto Upper Limit Setting]
– [Extended ISO]
Setting Range for Gain (Sensitivity)
When [SS/Gain Operation] is set to [SEC/dB], gain (sensitivity) can be set in the following ranges.
[Dual Native Gain Setting]
[AUTO]
[LOW]
[HIGH]
5. Recording settings - Main Assist Functions
] Select [SS/Gain Operation]
Displays the shutter speed in seconds and the gain in ISO.
Displays the shutter speed in degrees and the gain in ISO.
● The angle can be set in a range between 11° and 358°. (When [Synchro Scan] is set to
[OFF])
Displays the shutter speed in seconds and the gain in dB.
● 0 dB corresponds to either of the following ISO sensitivity values.
– When [Dual Native Gain Setting] is set to [AUTO] or [LOW]: [100]
– When [Dual Native Gain Setting] is set to [HIGH]: [640]
[Dual Native Gain Setting]
[Gain Setting]
[Auto Gain Lower Limit Setting]
[Auto Gain Upper Limit Setting]
[Extended Gain Setting]
[Extended Gain Setting]
[OFF]
[ON]
[OFF]
[ON]
[OFF]
[ON]
Setting Range for Gain (Sensitivity)
[AUTO], [0 dB] to [54 dB]
[AUTO], [–6 dB] to [66 dB]
[AUTO], [0 dB] to [18 dB]
[AUTO], [–6 dB] to [18 dB]
[AUTO], [0 dB] to [38 dB]
[AUTO], [–6 dB] to [50 dB]
- 106 - - 106 -