Synchronize The Time Code Of The External Device With That Of The Camera (Tc Out) - Panasonic Lumix DC-BS1H Operating Instructions Manual

Synchronize the Time Code of the External Device with That of the
Camera (TC OUT)
The initial time code value of the external device is synchronized according to the time code signal of the camera.
1
Prepare for time code synchronizing. (
Synchronization)
2
Set [TC Synchronization] to [TC OUT].
●
[MENU/SET] [
●
The time code signal is output according to the recording frame rate of the [Rec Quality] and the [Time Code Mode]
([DF]/[NDF]) setting.
3
Select [TC Output Reference].
●
[MENU/SET] [
[REC]
[HDMI] / [SDI]
4
Operate the external device to synchronize the time code.
Outputting the Time Code Signal Again
By setting as follows, the time code signal can be output just by connecting with the external device with the BNC cable:
– [Count Up] ([Time Code]): [FREE RUN]
– [TC Synchronization] ([External TC Setting] in [Time Code]): [TC OUT]
4. Recording Videos - Time Code
] [ ] [Time Code]
] [ ] [Time Code]
Outputs the time code signal for the images that you record.
When connected with an external device (external recorder, etc.) via HDMI/SDI, the
time code signal output is delayed slightly to match the HDMI/SDI images.
63 / Preparations for Time Code
[External TC Setting] [TC Synchronization]
[External TC Setting] [TC Output Reference]
- 64 - - 64 -
[TC OUT]