Attaching A Lens - Panasonic Lumix DC-BS1H Operating Instructions Manual

Attaching a Lens

● Change the lens in a location where there is not a lot of dirt and dust. If dirt or dust gets on the lens (
image sensor)
● Change the lens while the lens cap is attached.
1
Turn the camera off.
●
Press and hold the camera ON/OFF button for more than two seconds.
2
Turn the lens rear cap and the body cap in the direction of the arrow to remove them.
●
When removing the body cap, rotate it while pressing the lens release button.
A Lens release button
3
Align the lens lock pin on the camera and the lens fitting mark on the lens and then
rotate the lens in the direction of the arrow.
●
Attach the lens by rotating it until it clicks.
B
Lens lock pin
B
Lens fitting mark
C
● Insert the lens straight in. Inserting this at an angle to attach it may damage the camera lens mount.
2. Getting Started - Attaching a Lens
C
A
- 20 - - 20 -
274 / Dirt on the