Attaching The Exhaust Air Hose; Installing The Flue Screen - privileg SY-103E6S-E11-C29-L12-900 User Manual

Page EN-14 Assembly
(11)
5. Carefully hang the exhaust hood on the
two round-head screws (11) using the key-
hole openings.
6. If necessary, remove the exhaust hood
again to loosen or tighten the screws in
order to ensure that the hood is flush with
the wall.
2x
7. Turn two round-head screws (12) into the
prepared dowels to secure the exhaust
hood, and screw the exhaust hood tightly
to the wall.
(13)
(14)
(15)
8. Place the grease filters (15) with the pins
into the openings.
9. Push the locks (14) up; snap the grease
filters (15) in and release the locks.
10. Close the cover (13) again and allow it to
click into place. The exhaust hood is now
mounted to the wall.

Attaching the exhaust air hose

The exhaust air hose (4) must be installed if
you intend to use the exhaust hood with ex-
haust air operation.
(4)
(12)
1. Insert the end of the exhaust hose (4) with
the larger diameter (153 mm) into the con-
nection with the check valve.
2. Secure the lower end of the exhaust hose
with the cable tie (9).

Installing the flue screen

(6)
1. Screw the wall mount for the upper flue
screen (6) into the prepared dowels using
2 round-head screws (10).
2. Push the upper part (2) of the flue screen
halfway into the lower part (3) of the flue
screen.
(9)
(2)
(3)