Epson WorkForce Pro EC-4020 User Manual page 266

Table of Contents

Advertisement

LCD screen message
DNS error. Check DNS settings.
Authentication error. Check the
authentication method, authenticated
account, and authenticated
password.
Condition/solution
A communication error during scanning to a shared folder over a
network has occurred. Try the following:
• Make sure the computer you are scanning to is turned on and
not in sleep mode.
• Temporarily disable the computer's firewall and security
software, then try saving a scan over the network again. If
successful, check your security software settings.
• Check the computer's network type to make sure it is not set
to Public; you cannot save a scan to a shared folder over a
public network. Click the link to "Cannot Save a Scan to a
Shared Folder Over a Network" below for instructions.
• Make sure the shared folder path matches the path registered
to your product contacts list.
• Make sure the IP address of the computer is correct. If using
DHCP, obtain the IP address again. If using a static IP
address, change the computer name in the shared folder path
to the IP address and try again. (For example, change
\\EPSON02\SCAN to \\192.168.xxx.xxx\SCAN)
• Make sure the DNS setting is correct, and that the computer
name and IP address match when the DNS server
management table is updated. Contact your network
administrator.
An authentication error during scanning to a shared folder over a
network has occurred. Make sure the computer's user name and
password are correct and match those registered to your
product contacts list. Also make sure the password has not
expired.
266

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workforce pro ec-4030C11cf74203

Table of Contents