Assembling And Dismantling Low-Profile Units; Removing A Slot Cover - Fujitsu ESPRIMO E352 Series Operating Manual

Assembling and dismantling low-profile units
Low-profileboard
For every slot there is a slot cover provided. If no board is installed, the slot cover protects the slot.
When you install a board, do not discard the corresponding slot cover.
For cooling, protection against fire and in order to comply with EMC regulations,
you must refit the slot cover if you remove the board.

Removing a slot cover

► Open the casing (see
Fujitsu Technology Solutions
"Opening the casing", Page
1
2
33).
► Undo the screw (1).
► Pull the slot cover out of the slot (2).
System expansions
49