Table of Contents
Advertisement
Operation
1 = Indicator for diskette drive or multi-card
reader (depending on the configuration
level of the device)
2 = Power-on indicator
Hard disk indicator
The indicator lights up when the hard disk drive of the device is accessed.
Power-on indicator
Power-onindicator
Power-onindicator
Power-onindicator
Power-onindicator
Power-onindicator
In energy-saving mode the device must not be switched off with the main power switch
(if present) or disconnected from the mains, as this may result in data loss.
The indicator is lit green: The device is on.
•
•
The indicator flashes green: The device is in power-saving mode. After being
switched on with the ON/OFF switch, the device powers up or returns to the
state it was in before it entered power-saving mode.
•
The indicator is not lit: The device is switched off.
Diskette drive indicator or multi-card reader indicator (depending on the
configuration level of the device)
DiskettedriveMulti-cardreaderindicator
The indicator lights up when the diskette drive or the multi-card reader of the device is
accessed. Never remove a diskette or a multi-card while the indicator is lit.
Drive indicator, e.g. DVD
DVDindicator
DVDindicator
CD-ROM indicator
CD-ROM drive
The indicator lights up when the CD-ROM or DVD drive of the device is accessed.
Never remove a DVD while the indicator is lit.
22
1
2 3 4
3 = Hard disk indicator
4 = Drive indicator, e.g. DVD
Fujitsu Technology Solutions
Advertisement
Table of Contents
