Table of Contents
Advertisement
System expansions
Installing and removing heat sinks
Removing the heat sink
► Remove the cover (see chapter
► Disconnect the fan cables from the mainboard.
1
► Install the cover on the casing again (see chapter
Installing the heat sink
► Remove the cover (see chapter
2
► Connect the fan cables to the mainboard.
► Install the cover on the casing again (see chapter
48
"Removing a cover", Page
1
1
1
2
"Removing a cover", Page
2
2
2
1
33).
► Undo the screws (1).
► Remove the heat sink from the casing (2).
"Reattaching the cover", Page
33).
► Insert the heat sink into the casing (1).
To do this, correctly align the screw
holes on the heat sink with the screw
holes on the mainboard.
► Fasten the screws (2).
"Reattaching the cover", Page
Fujitsu Technology Solutions
36).
36).
Advertisement
Table of Contents
