Installing the rear fan
► Position the fan in the casing (1) and ensure that the catch (2) engages
in the openings on the back of the device.
► Connect the fan cable to the mainboard.
Replacing the processor
► Open the casing (see
► Remove the heat sink (see
► Replace the processor as described in the manual for the mainboard.
► Install the heat sink again (see
► Close the casing (see
Installing and removing heat sinks
Removing the heat sink
The shape and position of the heat sink are device-dependent.
► Open the casing (see
► Remove the hood of the hard disk fan and the hard disk fan itself (see
"Remove the hard disk fan", Page
► Undo the screws on the heat sink.
► Lift the heat sink out of the casing.
You can now replace the processor.
Fujitsu
1
2
"Opening the casing", Page
"Removing the heat sink", Page
"Installing the heat sink", Page
"Closing the casing", Page
"Opening the casing", Page
67).
33).
71).
72).
34).
33).
System expansions
71