Changing The Wash Programme - Hanseatic WQP8-7714I User Manual

(1)
(13)
NOTICE
Risk of damage!
Make sure that children and pets do
■
not stand on the open door.
Once the programme has come to an end
and the dishes have cooled, you can remove
them.
1. When unloading the dishwasher, start
with the lower rack and then unload the
upper rack. This will prevent water drip-
ping onto the lower layer of dishes from
the top layer of dishes.
2. Leave the dishwasher door slightly open
so that the inside of the dishwasher can
also cool off and dry out.
Changing the wash
programme
CAUTION!
Risk of scalding!
When you open the dishwasher door,
hot steam will come out.
Maintain a suffi cient distance from
■
the door and do not hold your head
or upper body directly above the
open door.
Keep children and pets away from the
■
appliance when opening the door.
Dishwasher operation
(2)
(11)
Make sure that children do not open
■
the door during operation.
You can interrupt an active dishwasher pro-
gramme at any point and start a new one.
However, do not forget to add extra dish-
washer detergent if the programme has al-
ready been running for a longer period and
the cover of the dishwasher detergent com-
partment is already open.
1. Open the dishwasher door slightly. The
remaining duration display will remain
permanently illuminated.
2. If required, add extra dishwasher deter-
gent.
3. Switch the appliance on and off with the
button (8).
4. Press the (13) button of the desired pro-
gramme.
The LED (1) of the selected programme is
illuminated, and the display (2) shows the
duration of the selected programme (for
example with the Eco programme: 3:10).
5. Select additional options if required, as
described on the previous pages.
6. Close the dishwasher door to start the
wash programme.
Page EN-19
(5) (6) (7)
(10) (9) (8)