Osd Menus - Hansol 920A User Manual

Controls
OSD MENU MENU
8. MOIRE Odd press
: Selects and blinks the function. Please control these key
MOIRE CONTROL
function with RED ICON in order the image not to shiver.
H. MOIRE ADJUST
Even press
V. MOIRE ADJUST
: Stops blinking and
50
ready to move function
you want.
9. LANGUAGE Selects the languages
with RED ICON and
LANGUAGE
Exit to No.2
PRESS MENU KEY
10. OSD POSITION Toggles OSD position
horizontally or vertically. menu left or
OSD H.POSITION
50
11. COLOR MODE Odd press
: Blinks the RED ICON
- color menu ICON.
COLOR - TEMP
Even press
: Stops blinking and
USER 6500K 9300K
ready to move function
you want.
When the color mode
ICON is blinking in user
mode, press, then go to
color adjust mode
No.12.
12. COLOR ADJUST Odd press
MODE : Selects and blinks the you want.
function you want.
RB GB BB RG GG BG
USER
50
Even press
: Stops blinking and
RB - Red background raster
ready to move function
GB - Green background raster
BB - Blue background raster you want.
RG - Red level gain
GG - Green level gain
BG - Blue level gain
10 User's Manual
Contros the amount of the selected Exit to No.2
Moves to function you want.
Moves to language you want. Exit to No.2
Moves the OSD Moves the OSD Exit to No.2
menu right or
down in the up in the
selected selected
function. function.
Moves to color mode you want Exit to No.1
and the selected "color mode"
will blink.
Moves to function you want. Exit to No.1
_ _ _
Controls the amount of function Exit to No.11
Moves to the function you want. Exit to No.11
OSD MENU MENU
13. ZOOM Odd press
: Selects zoom and
ZOOM
blinks the zoom ICON.
Even press
50
: Stops blinking and
ready to move another
function.
Recall ( ) : Recall control to the factory setting resets all the controls within the all menu.
If you want to return to the factory mode setting, press menu key on
Recall ICON.
Degauss ( ) : Eliminates the build-up of stray magnetic fields which alter the correct scan of the
electron beams and affect the purity of the screen colors, focus, and
convergence. When pressed, you screen image will jump and waver a bit as the
screen is demagnetized.
Caution : Please allow aminimum of 20 minutes to elapse between uses of the Degauss
button. Do no hold the button down continuously to avoid decreasing the life the
Deguass circuitry.
Geometry Controls Menu
RB GB BB RG GG BG
USER 50
The Geometry controls allow you to adjust the curvature or angle
of the sides of you display.
Pincushion : Increases or decreases the curvature of the sides either inward or outward.
Parallelogram : Increases or decreases the tilt of the sides either to the left or right.
Trapezoid : Increases or decreases the bottom of the screen to be the same as the top.
Pin Balance : Increases or decreases the curvature of the sides either to the left or right.
Rotation : Increases or decreases the tilt of the screen image relative to a horizontal line.
Controls
Shinks the Expands the Exit to No.1
image image
horizontally horizontally
and vertically. and vertically.
Moves to the function you want. Exit to No.1
User's Manual 11