Controls; Osd Controls - Hansol 920A User Manual

Controls

OSD controls

"ON SCREEN DISPLAY MENU" controls include the following extended controls such as Size,
Position, Geometry, Color Adjust, Brightness and Contrast Utilities. Adjustments are saved
instantly. The currently addressed control can be reset to factory settings by pressing the Reset
button.
Function of OSD buttons on the front of the monitor
DO : Displays OSD main Menu.
1) When Main menu is displayed. : Selects function with RED ICON.
2) When Submenu is displayed. : Selects function with RED ICON.
1) When no OSD on the Screen,
In the main menu, move the function to select one of the controls.
In submenu, adjust the bar to increase or decreases the adjustment.
2) When no OSD on the Screen,
/ : Direct Brightness access.
/ : Direct Contrast access.
Additional front controls
Power Switch : Turns the monitor power on or off. When the power is on, the LED is on.
LED Power indicator Light : Located up side of the power switch and indicates the monitor's
power mode. Each mode reduces the amount of power used by the monitor.
Accessing on screen menu
Press DO Button.
Turning off on screen menu
When in the main menu, press the EXIT button.
When in submenus, press the EXIT button twice.
8 User's Manual
OSD Menu
OSD MENU MENU
1. NO OSD Proceeds to NO.2
2. MAIN MENU The function with RED
ICON is
POSITION
- Performed : Recall,
Degauss
- Selected and blinked
: Color Adjust, Zoom
PRESS MENU KEY
- Proceeded : Others
3. BRIGHTNESS Moves to No.2
31.5KHz 60Hz PP
BRIGHTNESS
50
4. CONTRAST Moves to No.2
31.5KHz 60Hz PP
CONTRAST
50
5.H/V-POSITION Toggles horizontal or
vertical position
H. POSITION
50
6. H/V-SIZE Toggles horizontal or
vertical size
H. SIZE
50
7.GEOMETRY Odd press
: Selects and blinks the Selected funcion. (Refer to Geo-
function with RED ICON metry controls menu in detail)
GEOMETRY
PINCUSHION
PARALLELOGRAM
Even press
TRAPEZOID
PINBALANCE
: Stops blinking and
ROTATION
ready to move function
50% 50
you want.
Controls
Proceeds to Proceeds to No meaning
NO.3 NO.4
Moves to function you want. Exit to No.1
Decreases the Increases the Exit to No.1
brightness brightness
Decreases the Increases the Exit to No.1
contrast contrast
Moves the Moves the Exit to No.2
image down or image up or
left in the right in the
selected selected
function. function.
Shinks the Expands the Exit to No.2
image in the image in the
selected selected
function. function.
Controls the amount of the Exit to No.2
Moves to function you want. Exit to No.2
User's Manual 9