Fiber Optic Ethernet Ports - Siemens RUGGEDCOM RS8000H Installation Manual

Chapter 3
Communication Ports
8
Figure 11: RJ45 Ethernet Port Pin Configuration
For specifications on the available copper Ethernet ports, refer to
Specifications".
Section 3.2

Fiber Optic Ethernet Ports

Fiber optic Ethernet ports are available with either SC (Standard or Subscriber Connector) or ST (Straight Tip)
connectors. Make sure the Transmit (Tx) and Receive (Rx) connections of each port are properly connected and
matched to establish a proper link.
1
Figure 12: SC Port
1. Tx Connector 2. Rx Connector
For specifications on the available fiber optic Ethernet ports, refer to
Specifications".
14
Pin
1
Case
2
Figure 13: ST Port
1. Tx Connector
Name
1 RX+
2 RX-
3 TX+
4 Reserved (Do Not Connect)
5 Reserved (Do Not Connect)
6 TX-
7 Reserved (Do Not Connect)
8 Reserved (Do Not Connect)
Shield (Chassis Ground)
Section 4.3, "Copper Ethernet Port
1
2. Rx Connector
Section 4.4, "Fiber Optic Ethernet Port
RUGGEDCOM RS8000H
Installation Guide
Description
Receive Data+
Receive Data-
Transmit Data+
Transmit Data-
2
Fiber Optic Ethernet Ports