Certification; Agency Approvals; Fcc Compliance; Industry Canada Compliance - Siemens RUGGEDCOM RS8000H Installation Manual

RUGGEDCOM RS8000H
Installation Guide

Certification

The RS8000H device has been thoroughly tested to guarantee its conformance with recognized standards and
has received approval from recognized regulatory agencies.
• Section 6.1, "Agency Approvals"
• Section 6.2, "FCC Compliance"
• Section 6.3, "Industry Canada Compliance"
• Section 6.4, "EMI and Environmental Type Tests"
Section 6.1

Agency Approvals

The RS8000H has received approval from various agencies.
Agency
CSA
CE
FCC
Section 6.2

FCC Compliance

This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference on his own expense.
Section 6.3

Industry Canada Compliance

CAN ICES-3 (A) / NMB-3 (A)
Agency Approvals
Standards
CSA C22.2 No. 60950-1, UL 60950-1
EN 60950-1, EN 61000-6-2, EN
50581, EN 55022, EN 60825-1
FCC Part 15, Class A
Certification
Comments
Approved
CE Compliance is claimed via
Declaration of Self Conformity Route
Approved
Chapter 6
21