Table of Contents
Advertisement
2.3. Mounting
The Studio Force II
TM
fixtures are equipped with built-in mounting brackets or trunnions for floor mounting.
The mounting brackets feature a pair of quick release levers for easy tilt adjustment. The hidden lever gives
user quick access to unlock/lock the fixture tilt mechanism without using any tools and leaves the fixture side
flat to place them next to each other without any gap. Wall and truss mounting applications may require
additional hardware.
Note: Secure the fixture with a safety bond. Fixing holes are provided in the endplates and
fixture brackets.
2.4. Optics
TM
The Studio Force II
fixtures are built with lenses that optimize the beam spread. The unit comes with
preinstalled symmetric lenses for high intensity homogenized output and extremely uniform wash. The beam
distribution is symmetrical when Studio Force II
throws intense uniform white output at extreme intensity and provides a tight beam angle of ≈22
Cyc & Border Lens
"Cyc Lens" and "Border Lens" are slide-in optical accessories available to adjust the light output of the
TM
Studio Force II
fixtures, to suit a wide range of applications. One accessory slot is provided on the front
of the fixture to hold a slide-in lens accessory. Matching indentations on both ends of lens are provided for
locking the lens in place.
Studio Force II comes standard with a 22º X 22º beam angle optics. 2 additional lenses can be position in front
Studio Force II User Manual V1.1
Figure 2 (SF-II 12 - Quick lever tilt adjustment)
TM
is used to directly illuminate an area on stage. The fixture
Figure 3 (Symmetrical Lens)
www.chroma-q.com
9
o
.
Aug. 2019
Advertisement
Table of Contents
