Page 1
User Manual 65701 Model Code: DI881LT2 Version 2.01 The use of diagrams and illustrations in the manual are for reference only. The actual product may be different. Product design and specifications are subject to change without notice...
Powering On/Off the Display ......................13 Using the Remote Control ......................14 Using the Rear Panel Controls .....................16 Navigating the On Screen Display (OSD) Menu ................17 Specifications...........................21 Input Mode............................22 Pin Assignments ..........................23 RS-232 Output ..........................23 RS-232 Input..........................23 Troubleshooting ..........................24 About DSM365 ..........................25 65701 User Manual...
SJ/T-11363-2006 and 2011/65/EU. Recycling and Energy Information DynaScan is firmly committed to its environmental protection efforts and we believe that reducing our products’ impact on the environment is of the utmost importance. We are dedicated to meet the latest environmental protection regulations.
Article 3.2 EN 55035:2017 EN 300 328 V2.1.1 (2016-11) EN 301 489-1 V2.2.0(2017-03), Class A EN 301 489-17 V3.2.0(2017-03) - Frequency bands and Powers a. WIFI 2.4G-2412~2462MHz. b. Maximum radio-frequency power transmitted in the 2.4GHz is 50mW. 65701 User Manual...
In order to avoid burn-in, avoid prolonged display of static or fixed images on the screen. Power supply cord must not be attached to the building surface, nor run through walls, ceilings, floors and similar openings in the building structure. 65701 User Manual...
Clean the LCD backside at least once a month for dust and other particles. • Unplug the LCD immediately and contact a DynaScan certified service professional as soon as possible when any of the following situations occurs: Damaged power cord or power plug.
Confirm that the accessories below are shipped along with the display. If any item is missing, please contact your dealer. The color and shape of the accessories may vary with the products. 65701 Professional LCD. Power cable x1 pc. •...
The LCD must be properly installed using a wall mount. Incorrect installation may cause injury or damage the equipment. Product warranty does not cover the damage caused by improper installation and DynaScan shall not be held responsible in such incident. Refer to the mount manufacturer’s instructions for proper installation.
Page 9
<Front> Portrait mode: Rotate the set clockwise 90° (mandatory) The orientation sticker can be found on the rear of display, which is for distinguishing the direction • of installation. 65701 User Manual...
Page 10
Inspect the fasteners regularly for signs of loosening or deformation. Please perform • appropriate corrective measures when a problem is identified. Neglecting the problem may worsen the situation. Increase the inspection frequency on areas where previous maintenance had occurred to ensure • the problems do not occur again. 65701 User Manual...
A wall mount is not included. Please purchase a VESA Standard wall mount to secure the LCD. • DynaScan is not responsible for damages caused by using non-standard wall mounts. Verify that the mounting location can support the weight of the LCD before installation.
DP-IN (or HDMI 1-IN, HDMI 2-IN) on the back of the display shown the in the diagram below. Connect the other end of the DP cable (HDMI cable) to the DP output (or HDMI output) of the video source. Refer to your video device’s manual for additional information. 65701 User Manual...
RS-232 (IN): RS232C network input connection for remote control from PC. RS-232 (OUT): RS232C control function for the daisy chain application. AC (IN): Connect the supplied power cord to the wall outlet. Power Switch: Press to switch the main power on/off. 65701 User Manual...
Powering On/Off the Display To turn on/off the display, press the power switch on the back of the display as shown in the diagram below. NOTE: The remote control only works when the power switch is ON. 65701 User Manual...
Ambient light may affect the performance of the remote control. Avoid fluorescent or neon lights • in the vicinity. Connect the ESK302 cable to the sensor port (mini USB port) on the back of the display. When using the remote control, aim the remote at the IR receiver on the ESK302. 65701 User Manual...
Page 16
Move the cursor up or change the setting of selected item. LEFT Exit the current selection. RIGHT Select the highlighted item. DOWN Move the cursor down or change the setting of selected item. Enter (for DSM365 only) BACK Return to the last page. (for DSM365 only) 65701 User Manual...
OSD On / Off, Power On / Off. Move the cursor up or change the setting of selected item. DOWN Move the cursor down or change the setting of selected item. LEFT Exit the current selection. RIGHT Select the highlighted item. 65701 User Manual...
Adjust the contrast level. Range 0 – 100. Adjusts the Gamma value. (Native, 2.2, 2.4 Gamma Native and sGamma) Selects the black level to adjust the screen Black Level RGB Full gray scale. "Limited" for video source uses 65701 User Manual...
Page 19
When ambient light is bright, the screen will adjust to the HIGH LEVEL brightness value set; when ambient light is dark, the screen will adjust to the LOW LEVEL brightness value set. When the Timer mode is set, the 65701 User Manual...
Page 20
Enable/disable the remote control for Menu. Note: When disabled, the remote control function can be enabled again from IR Control the control panel on the display or through the DynaScan “Display Manager” application. Set volume. Volume Range 100 – 0.
Page 21
The hours accumulated during the display Running Time executing. Some functions may not be available for all models. *Adjusted value: Each R/G/B value for this product has been individually adjusted during production to a preset color temperature of 6500K. 65701 User Manual...
Audio OUT *1 I/O Ports USB port IN *1, Upgrade *1 RJ-45 IN *1 SD card IN *1 Extension Connector IN *1 (ESK only) (Mini USB) Fuse 6.3A Design and specifications are subject to change without notice. 65701 User Manual...
PIN No. NAME Connected to 7&8 Connected to 6 Connected to 4 Connected to 1&8 Connected to 1&7 RS-232 Input PIN No. NAME Connected to 7&8 Connected to 6 Connected to 4 Connected to 1&8 Connected to 1&7 65701 User Manual...
(refer to section “Pin Assignments”, p.23). To ensure that RS-232 port is not in use by other software. If you are still having trouble with your DynaScan DS² Professional LCD, contact your dealer or DynaScan directly for more assistance. 65701 User Manual...
Press the MENU button on either the rear panel control or remote control to show the OSD. • Use the navigation arrows to select and adjust the Input Source. • [Input Source → Main → DSM365] ITEM DESCRIPTION APPS Show the Installed APPS. SETTINGS Enter the setting menu. 65701 User Manual...
Need help?
Do you have a question about the 65701 and is the answer not in the manual?
Questions and answers