Table of Contents
Advertisement
▇
Installation Tools
1. Electric drill: ¢6mm or above
2. Cross head screwdriver
3. Hex socket (used to fix 4.8 × 20mm self-tapping screws)
▇
Warnings
:
* The radio operates in 13.6 ± 15％V negative ground systems only. Check the voltage
and polarity of the power supply on the vehicle before installation.
* Be sure to check how far the screw will extend below the radio surface to avoid damage
to the auto wiring or auto parts when drilling mounting holes.
* Connect the radio with the supplied antenna and power cable before installing the radio
by the mounting bracket.
* Install the radio securely using the supplied mounting bracket to make sure that the
radio will not loosen in the event of accidents. The loose radio may cause injury to the
passenger.
* Arrange the installation location of the radio to make sure that the control unit in the front
panel is convenient for operation.
* Be sure to determine the location of the installing holes before installation and drilling.
* Be sure to make room at the rear side of the radio for power cable connection.
* When replacing the fuse in the DC power cable, be sure to replace it with a fuse of the
same specifications. Never replace a fuse with one that has a higher capacity value.
第 11 页 共 31 页
Advertisement
Table of Contents
