Protective Screen Film; First Time Use Of The Ht660E - Unitech HT660EBTG User Manual

Protective Screen Film

To protect screen, the HT660e has been provided with a protective plastic film.
You may remove it (if required). The screen will be more susceptible to
scratching without the film, but will be more readable.

First Time Use of the HT660e

Pressing the Power ON/OFF Key
The Unitech HT660e welcome screen appears. The Windows CE screen will
appear shortly thereafter.
Align the Screen
When prompted, use the stylus to tap the targets as they appear in order to
align the touch screen.
When you complete the procedure, press any key or press anywhere on the
touch screen to start up the WinCE system.
Adjusting Screen Brightness
To adjust the original default setting of the screen brightness, the backlight
setting will be required. Please refer to the setting section below for the new
setting procedure.
Setting Time Zone/ Date
Before using the HT660e please take a few minutes
to set the time and date so that data can be properly
time-stamped.
9