Table of Contents
Advertisement
required to connect the HT660e to your host computer.
If you run the Windows NT® operating system with a service pack, you will
be informed during setup that you may need to reinstall the service pack.
Try connecting first, and if unsuccessful, reinstall the latest service pack.
Requirements
To synchronize, ActiveSync version 3.7 or higher must be installed on both
your desktop computer and the HT660e terminal. The HT660e terminal is
installed with ActiveSync and shipped. Therefore, you must install ActiveSync
3.7 on your desktop computer.
To install ActiveSync on your desktop computer, please link to Microsoft
website to get free download driver.
Installation
Follow the installation procedure below to install Microsoft ActiveSync,
connect your HT660e to your desktop computer, and establish a partnership
for synchronization, if required.
In order to exchange data between your computer and the HT660e, Microsoft
ActiveSync must be installed on your computer. Use A USB cable that comes
with your device or the docking station to connect the device to your
computer.
NOTE: If you have a previous version of the Microsoft ActiveSync installed in
your computer, uninstall it first before installing the latest version of
Microsoft ActiveSync.
To install Microsoft ActiveSync on your computer:
1.
Close any open programs, including those that run at startup, and disable
any virus-scanning software.
2.
Download the ActiveSync software from the Microsoft ActiveSync
Download page at
http://www.microsoft.com/downloads/details.aspx?Fami-lyID=7269173a-
28bf-4cac-a682-58d3233efb4c&DisplayLang=en.
3.
Browse to the location of the downloaded file, and double-click it. The
installation wizard begins.
4.
Follow the instructions on the screen to install Microsoft ActiveSync.
22
Advertisement
Table of Contents
