Removing The Assy-Frame Cooktop - Samsung NX58R4311SS Service Manual

3. Disassembly and Reassembly

3-3 Removing the Assy-Frame Cooktop

WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range. Replace all panels before operating range. Failure to do so
can result in death or electrical shock.
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
Shut off gas supply to the range before servicing. Check all gas lines and fittings for leaks before operating
the range. Replace all panels before operating range. Failure to do so can result in death or personal injury
from explosion, fire, or asphyxiation.
CAUTION
When you work on the gas range, be careful when handling sheet metal parts. Sharp edges may be
present, and you can cut yourself if you are not careful.
Parts
Assy-Frame
Cooktop
Assy-Frame
Cooktop
This document can not be used without Samsung's authorization.
Explanation Photo
ASSY GRATE
(2 SIDE / 1 CENTER)
BURNER CAP
BURNER HEAD
BURNER CUP
CHASSIS SPRING
COOKTOP
MANIFOLD PANEL
ELECTRODE
14
1. Turn off the electrical supply
going to the range.
2. Shut off the gas shut-off valve
in the gas supply line to the
range.
3. Lift off the three grates.
4. Lift off the 5 burner caps and
the 5 burner heads from the
burner cups.
5. Remove screws of the 5 burner
cups.
6. Push the 2 spring located
between the frame cooktop and
the chassis manifold panel with
a thin iron plate.
Knobs should be removed prior
to disassembling the cooktop
frame and take notice that
Chassis-Manifold Panel is not
damaged during the operation.
FRAME
7. Push the cups down below the
COOKTOP
surface of the frame cooktop.
NOTE: Make sure the electrodes
are below openings in the
cooktop to prevent interference
and damage during removal.
Explanation