Replacing The Handle-Door - Samsung NX58R4311SS Service Manual

3. Disassembly and Reassembly

3-13 Replacing the Handle-Door

WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range. Replace all panels before operating range. Failure to do so
can result in death or electrical shock.
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
Shut off gas supply to the range before servicing. Check all gas lines and fittings for leaks before operating
the range. Replace all panels before operating range. Failure to do so can result in death or personal
injury from explosion, fire, or asphyxiation.
CAUTION
When you work on the gas range, be careful when handling sheet metal parts. Sharp edges may be
present, and you can cut yourself if you are not careful.
Parts
Handle-Door
This document can not be used without Samsung's authorization.
Explanation Photo
25
Explanation
1. Remove the oven door from the
range.
2. Place the oven door on a padded
work surface with the front glass
facing down.
3. Remove 3 bottom screws from the
door.
4. Remove 2 Handle-screws from the
door.
5. Lift the door rear assembly off the
front assembly and set it aside
6. Remove 2 spacers and 2 screws.
7. Remove 2 screws to replace the
Handle-Door