Configuring The Postamble - Intermec SF61BUG User Manual

Configuring the Postamble

SF61 Cordless Scanner User's Guide
The default postamble is <CR> <LF>. For certain applications or
when using your scanner as an HID Bluetooth device you may need to
change this setting. Use the following configuration bar codes to
change the default postamble in your scanner.
More postamble options are available with EasySet or with your
Intermec computer (see
and Configuring your Scanner From Your Intermec Computer
the present chapter).
Carriage Return + Line Feed (*)
Carriage Return
Chapter 3 — Configuring the SF61B Cordless Scanner
Configuring Your Scanner with EasySet
in
None
Enter
53