Gree SAP09HP230V1AH Service Manual page 20

Service Manual
10. TEMP button
Press this button, you can see indoor set temperature,indoor ambient temperature or outdoor ambient temperature on indoor unit's display.
The setting on remote controller is selected circularly as below:
When selecting" "with remote controller or no display, temperature indicator on indoor unit displays set temperature; When selecting"
with remote controller,temperature indicator on indoor unit displays indoor ambient temperature; When selecting"
temperature indicator on indoor unit displays outdoor ambient temperature. 3s later it will return to the setting temprature or it depends on
the other received signal within 3s.
Attention: When displaying the outdoor ambient, the displaying range is 32-99 °F and 0-60°C,When it goes beyond the range, it keeps the
threshold data (the smallest 0 or 32°F and the largest 99°F or 60°C).
Warm tips: When operating buttons on the cover please make sure the cover is closed completely.
NOTE: Outdoor temperature display is not available for some models. At that time, indoor unit receives"
temperature.
11. /
button (These functions are not available in the United States)
scavenging function;LCD displays"
displays" "and " " .Press this button for the third time to quit healthy and scavenging functions simultaneously.Press the button for the
fourth time to start healthy function; LCD display"
NOTE: This function is applicable to partial of models.
12. I FEEL button
button, every 200ms to send I FEEL once, after this function started,the remote control will send temperature to the main un it in every 10
minutes.When repress this button, this function will be turned off.
13. LIGHT button
Press this button at unit On or Off status,Light On and Light Off can be set up.After powered on, Light On is defaulted.
14. X-FAN button
Pressing X-FAN button in COOL or DRY mode,the icon
to dry the indoor unit even though you have turned off the unit.After energization, X-FAN OFF is defaulted.X-FAN is not available in
AUTO,FAN or HEAT mode.
15. QUIET button
Press this button,the Quiet status is under the Auto Quiet mode (display"
Quiet OFF(there is no signal of "
the fan speed is not available.
16. SLEEP button
Press this button, can select Sleep 1 (
Sleep 1 is Sleep mode 1, in Cool, Dehumidify modes: sleep status after run for one hour, the main unit setting temperature will increase 1°C
°F or 2 °F ）, 2 hours,setting temperature increased 2°C（3
（1
status after run for one hour the setting temperature will decrease 1°C（1
the unit will run at this setting temperature.
Sleep 2 is sleep mode 2, that is air conditioner will run according to the presetting a group of sleep temperature curve.
In Cool mode:
(1) When setting the initial temperature 16~23°C（61
°F or 2 °F ） in every hour,after 3°C （5
（1
after that the unit will keep on running under this temperature;
(2) When setting the initial temperature 24~27°C, after turned on Sleep function, the temperature will be increased 1°C in every hour,after
2°C the temperature will be maintained, after 7hours,the temperature will be decreased 1°C（1
under this temperature;
(3) When setting the initial temperature 28~29°C（82
°F or 2 °F ） in every hour, after 1°C （1
（1
°F or 2 °F ）, after that the unit will keep on running under this temperature;
（1
(4) When setting the initial temperature 30°C（86
°F or 2 °F ）, after that the unit will keep on running under this temperature;
（1
In Heat mode:
(1) Under the initial presetting temperature 16°C（61
(2) Under the initial presetting temperature17~20°C（62
°F or 2 °F ）in every hour, after 1°C（1
（1
(3) Under the initial presetting temperature 21~27°C（69
） in every hour, after 2°C（3
°F or 2 °F
（1
(4) Under the initial presetting temperature 28~30°C（82
3°C（5 ） decreased, this temperature will be maintained
°F or 6°F
Technical Information
".Press the button for the second time to start healthy and scavenging functions simultaneously;LCD
" .Press this button again to repeat the operation above.
is displayed and the indoor fan will continue operation for 2 minutes in order
" displayed),after powered on,the Quiet OFF is defaulted. Under the Quiet mode (Display "
), Sleep 2 ( ),Sleep 3 (
°F or 4 °F
°F or 74°F）
°F or 6°F ）the temperature will be maintained, after 7hours,the temperature will be decreased 1°C,
°F or 75°F
°F or 2 °F ）the temperature will be maintained, after 7hours,the temperature will be decreased 1°C
）, under this temperature setting, after 7hours, the temperature will be decreased 1°C
°F
°F ）, it will run under this setting temperature all along.
°F or 68°F）
°F or 2 °F ） decreased, this temperature will be maintained.
°F or 81°F）
） decreased, this temperature will be maintained.
°F or 4°F
°F or 86°F）
no display
" and "Auto"signal ) and Quiet mode(display "
) and cancel the Sleep, circulate between these, after
）, the unit will run at this setting temperature; In Heat mode: sleep
）, 2 hours, setting temperature will decrease 2°C, then
°F or 2 °F
, after turned on Sleep function, the temperature will be increased 1°C
）, after turned on Sleep function, the temperature will be increased 1°C
, after Sleep function started up, the temperature will decrease 1°C
, after Sleep function started up, the temperature will decrease 1°C
, after Sleep function started up, the temperature will decrease 1°C
"with remote controller,
"signal, while it displays indoor set
）, after that the unit will keep on running
°F or 2°F
"
" singal) and
"signal),
,
17