Gree SAP09HP230V1AH Service Manual page 107

Steps
7. Remove electric box assy
Remove screws fixing electric box assy and
mid-isolation board, loosen the bonding tie, pull off the
wiring terminal, lift to remove the electric box assy.
8. Remove electric reactor
Remove the screws fixing electric reactor, to remove
the electric reactor.
9. Remove motor and motor support
Remove the four tapping screws fixing motor, pull out
the contact tag of motor wiring, to remove the motor.
Remove the two tapping screws fixing motor support
and chassis, lift to remove the motor support.
104
Procedure
motor
motor support
Service Manual
electric box cove r
electric box assy
electric
reactor
Installation and Maintenance