Table of Contents
Advertisement
2. Product Overview
This chapter provides basic information about the QNAP device.
About the TS-h2490FU
Powered by 2nd Gen AMD EPYC™ 7002 series processors, the all-flash TS-h2490FU is designed to deliver
a scalable platform for enterprise-level solutions. Featuring 24 U.2 NVMe solid-state drives, it delivers up to
472K/205K random read/write IOPS with ultra-low latency. This ZFS NAS comes with utmost reliability and
supports inline data deduplication and compression, near-limitless snapshots, and real-time SnapSync. The
TS-h2490FU is ideal for I/O-intensive and latency-sensitive applications, eliminating productivity bottlenecks
in data centers, virtualization, and mission-critical tasks.
Hardware Specifications
Warning
• If your QNAP product has hardware defects, return the product to QNAP or a QNAP-
authorized service center for maintenance or replacement. Any attempt to repair or
perform maintenance procedures on the product by you or an unauthorized third-party
invalidates the warranty.
• QNAP is not responsible for any damage or data loss caused by unauthorized
modifications and installation of unsupported third-party applications.
• For details, see the
Tip
Model specifications are subject to change without prior notice. To see the latest
specifications, go to https://www.qnap.com.
Ordering P/N
TS-h2490FU-7232P-64G
TS-h2490FU-7302P-128G
Component
Processor
CPU
Frequency
Architecture
Encryption engine
Memory
Pre-installed memory
QNAP Warranty Terms and
CPU
AMD EPYC™ 7232P
AMD EPYC™ 7302P
TS-h2490FU-7232P-64G
AMD EPYC™ 7232P
8-core/16-thread 3.1 GHz base/3.2
GHz burst
x86 64-bit
AES-NI
64 GB RAM: 8 x 8 GB RDIMM
DDR4 ECC
Conditions.
Memory
64 GB
128 GB
TS-h2490FU-7302P-128G
AMD EPYC™ 7302P
16-core/32-thread 3.0 GHz
base/3.3 GHz burst
128 GB RAM: 8 x 16 GB RDIMM
DDR4 ECC
TS-h2490FU User Guide
Power supply
Redundant
Redundant
Product Overview
4
Advertisement
Table of Contents
