Installing Quts Hero Using Qfinder Pro - QNAP TS-h2490FU User Manual

Method
Qfinder Pro If the NAS is connected to your local area
installation network, you can do the following:
(Recommended)
For details, see
Using Qfinder
Cloud installation If the NAS is connected to the internet,
you can do the following:
For details, see
Using the Cloud

Installing QuTS hero Using Qfinder Pro

Warning
Installing QuTS hero deletes all data on the drives. Back up your data before proceeding.
Note
You can revert to QTS operating system anytime. For details, see QuTS hero user guide.
1. Power on the device.
2. Connect the device to your local area network.
3. Run Qfinder Pro on a computer that is connected to the same local area network.
Note
To download Qfinder Pro, go to https://www.qnap.com/utilities.
4. Locate the NAS in the list and then double-click the name or IP address.
The Smart Installation Guide opens in the default web browser.
5. Click Start Smart Installation Guide.
The Install Firmware window appears.
6. Install firmware using any of the following methods:
Installation methods
Automatic
Description
• Locate the NAS using Qfinder Pro.
• Complete the steps in the Smart
Installation Guide wizard.
Installing QuTS hero
Pro.
• Scan the QR code on the NAS.
• Log into your myQNAPcloud account.
• Use myQNAPcloud Link to remotely
access your NAS.
• Complete the steps in the Smart
Installation Guide wizard.
Installing QuTS hero
Key.
• Computer
• Network cable
• Qfinder Pro installer
• Computer or mobile device
• Network cable
• myQNAPcloud account
• Cloud Key
Click Start.
Automatically searches for available firmware
updates and installs firmware.
TS-h2490FU User Guide
Requirements
Steps
Installation and Configuration 31