QNAP TS-h2490FU User Manual page 42

Hide thumbs Also See for TS-h2490FU:
Table of Contents

Advertisement

Duration
Long beep (1.5 seconds) 3 (every 5 minutes)
Long and short beeps
Frequency
2
1
1 long and 2 short beeps The JBOD expansion unit has been removed.
Description
• A power error occurred.
• The system fan is not functioning.
• The fan module has been removed.
• The NAS data cannot be copied to the external
storage device connected to the front USB port.
• The storage pool is about to reach full capacity.
• The storage pool has reached full capacity.
• A storage pool status error occurred.
• The shared folder is about to reach its full
capacity.
• The shared folder has reached its full capacity.
• A shared folder status error occurred.
• A drive is plugged in or out.
• The NAS was powered off by force shutdown
(hardware shutdown).
• The NAS was powered on successfully and is
ready.
TS-h2490FU User Guide
Basic Operations
41

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ts-h2490fu-7232p-64gTs-h2490fu-7302p-128g

Table of Contents