Resetting The Camera - ERNITEC MicroView MVIB-01IR-E Quick Start Manual

Network Bullet Camera·Quick Start Guide
No. Description
1 Mounting Base
2
3
4
5 Adjusting Nut
6 WPS/RESET Button
This type of bullet camera supports PoE power supply. You can

power the camera by connecting both DC 12V interface and the
Ethernet interface. Or you can connect the Ethernet interface only.
WPS/RESET Button

WPS function and Reset function share the same button. The
button works as a reset button only when you press it when the
camera is powered on.

Resetting the Camera

Press WPS/RESET button about 10s when the camera is power on or
rebooting to restore the default settings, including the user name,
password, IP address, port No., etc.
Back Case
Sun Shield
Lens
Description
No.
7 Memory Card Slot
8 Power Supply Interface
10/100M Self-adaptive
9
Ethernet Interface
10
11
12
Description
PoE Cable
GND Screw