Network Test; About; Login/Exit From Current Account - Launch X-431 PRO3 User Manual

LAUNCH
Tap "Scan" to select the desired local Wi-Fi network from the list, and type in
the security password (If it is an open network, password is not required), and
then tap "Confirm".
4. Once the Wi-Fi network of the printer is connected and the printer is found,
tap "Printing test" to test the printing.
Now you can use the Wi-Fi printer to print!
If the printer is not found, please reset the printer to default factory settings (refer
to Step 2 for details) and check whether the current device and the printer are on
the same LAN.
B. If you have configured the Wi-Fi printer to the LAN:
2. Tap "Connect to Printer":
a). If the local network remains as it is, tap "Test Print" directly to test the
printing.
b). If the local network changes, you have to reset the Wi-Fi printer.

9.8.4 Network test

It enables you to test whether the current network environment is good or not. It
is normal that you may encounter a logout while testing.

9.8.5 About

The software version information and disclaimer are included.

9.8.6 Login/Exit from current account

To logout the current user ID, tap "Exit from current account".
To login the system again, tap "Login".
X-431 PRO3 User Manual
79