Launch X-431 PRO3 User Manual page 4

LAUNCH
process of uploading or downloading. Or else it may result in program error.
 Do not delete unknown files or change the name of files or directories that
were not created by you, otherwise your X-431 PRO3 software might fail to
work.
 Be aware that accessing network resources can leave your X-431 PRO3
vulnerable to computer viruses, hackers, spyware, and other malicious
activities that might damage your device, software or data. It is your
responsibility to ensure that you have adequate protection in the forms of
firewalls, antivirus software, and anti-spyware software and keep such
software up to date.
Precautions on Using X-431 PRO3
Before using this test equipment, please read the following safety information
carefully.
 Always perform automotive testing in a safe environment.
 If the diagnostic connector remains unused for a long period of time, it is
suggested to unplug the connector from vehicle's DLC to conserve battery
power.
 Wear an ANSI-approved eye shield when testing or repairing vehicles.
 The vehicle shall be tested in a well-ventilated work area, as engines produce
various poisonous compounds (hydrocarbon, carbon monoxide, nitrogen
oxides, etc.)
 Do not connect or disconnect any test equipment while the ignition is on or
the engine is running.
 Put blocks in front of the drive wheels and never leave the vehicle unattended
while testing.
 Keep the test equipment dry, clean, free from oil, water or grease. Use a mild
detergent on a clean cloth to clear the outside of the equipment as
necessary.
 Do not drive the vehicle and operate the test equipment at the same time.
Any distraction may cause an accident.
 Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or
hot engine parts.
 Before starting the engine, put the gear lever in the Neutral position (for
manual transmission) or in the Park (for automatic transmission) position to
avoid injury.
 To avoid damaging the test equipment or generating false data, please make
sure the vehicle battery is fully charged and the connection to the vehicle
X-431 PRO3 User Manual
iii