Table of Contents
Advertisement
LAUNCH
light intensity automatically. Alternatively, you can also adjust it manually.
1. On the home screen, tap Other Modules -> Built-in apps -> Tablet Settings -> Display -> Brightness level.
2. Drag the slider to adjust it.
Alternatively, user may also slide the Automatically brightness switch to ON, and the system will automatically
adjust the screen brightness.
*Tips: Reducing the brightness of the screen is helpful to save the power of the tablet.
3.5 Changing Language
The tablet supports multiple languages. To change the language of the tablet, please do the following:
1. On the home screen, tap Other Modules -> Built-in apps -> Tablet Settings -> Language & input -> Language.
2. Tap the desired language from the list and the system will change to the chosen language.
3.6 Network Setup
The tablet has dual built-in Wi-Fi communication modules. One is used to communicate with the tablet, and the other
allows the tablet to get online. Once you're online, you can register your tool, update diagnostic software & APK,
browse the Internet and send email on your network.
If the SmartLink C device is successfully activated, it will be automatically bound to the tablet. In this case it is not
necessary for the user to manually configure it again.
*Note: Once WLAN is set as ON, the tablet will consume more power. While WLAN keeps unused, please turn it off to conserve
battery power.
1. On the home screen, tap Other Modules -> Built-in apps -> Tablet Settings -> WLAN.
2. Tap or slide the Wi-Fi switch to ON, the tablet starts searching for all available wireless LANs.
3. Choose the desired Wi-Fi access point / network,
If the network you chose is open, you can connect directly;
If the selected network is encrypted, you have to enter the right security key (network password).
When this tool is in range, it will connect to the previously linked network automatically.
7
X-431 IMMO PAD User Manual
Advertisement
Table of Contents
