The STP System Configuration screen in
The page includes the following fields:
Basic Settings
Object
Protocol Version
Bridge Priority
Hello Time
Forward Delay
User's Manual of GS-5220-24T4XV(R) Managed LCD Switch
Figure 4-3-4-4
appears.
Figure 4-3-4-4: STP Bridge Configuration Page Screenshot
Description
The STP protocol version setting. Valid values are:
STP (IEEE 802.1D Spanning Tree Protocol)
RSTP (IEEE 802.2w Rapid Spanning Tree Protocol)
MSTP (IEEE 802.1s Multiple Spanning Tree Protocol)
Controls the bridge priority. Lower numeric values have better priority. The bridge
priority plus the MSTI instance number, concatenated with the 6-byte MAC
address of the switch forms a Bridge Identifier.
For MSTP operation, this is the priority of the CIST. Otherwise, this is the priority
of the STP/RSTP bridge.
The interval between sending STP BPDU's. Valid values are in the range 1 to 10
seconds, default is 2 seconds
The delay used by STP Bridges to transition Root and Designated Ports to
Forwarding (used in STP compatible mode). Valid values are in the range 4 to 30
147