Table of Contents
Advertisement
Click the "
3.
Select on the firmware and then click "
4.
5.
Once the software is loaded to the system successfully, the following screen appears. The system will load the new
software after reboot.
DO NOT Power OFF
Do not quit the Firmware Upgrade page without pressing the "OK" button after the image is
loaded. Or the system won't apply the new firmware. User has to repeat the firmware
upgrade processes.
4.7.2 Save Startup Config
This function allows to save the current configuration, thereby ensuring that the current active configuration can be used at the
next reboot as the screen in
"button of the Main page; the system would pop up the file selection menu to choose firmware.
". The Software Upload Progress would show the file with upload status.
Figure 4-7-1-2: Software Successfully Loaded Notice Screen
the Managed Switch until the update progress is complete.
Figure 4-7-2-1
appears. After saving the configuration, the screen in Figure
Figure 4-7-2-1: Configuration Save Page Screenshot
User's Manual of GS-5220-24T4XV(R) Managed LCD Switch
332
4-7-2-2
will appear.
Advertisement
Table of Contents
