Planet GS-5220-24T4XVR User Manual page 104

L2+ gigabit/10 gigabit managed lcd switch
Hide thumbs Also See for GS-5220-24T4XVR:
Table of Contents

Advertisement

 VLAN ID
 Reflector Port
 Source VLAN(s)
Configuration
Remote Mirroring
Port Configuration
For a given port, a frame is only transmitted once. It is therefore not possible to mirror Tx frames on
the mirror port. Because of this, mode for the selected mirror port is limited to Disabled or Rx only.
Buttons
: Click to apply changes
User's Manual of GS-5220-24T4XV(R) Managed LCD Switch
Source
The switch is a source node for monitor flow.
The
source
port(s),
RMirror destination
The switch is an end node for monitor flow.
The
destination port(s)
The VLAN ID points out where the monitor packet will copy to. The default VLAN ID is
200.
The reflector port is a method to redirect the traffic to Remote Mirroring VLAN. Any device
connected to a port set as a reflector port loses connectivity until the Remote Mirroring is
disabled.
In the stacking mode, you need to select switch ID to select the correct device.
If you shut down a port, it cannot be a candidate for reflector port.
If you shut down the port which is a reflector port, the remote mirror function cannot work
The switch can supports VLAN-based Mirroring. If you want to monitor some VLANs on
the switch, you can set the selected VLANs on this field.
The following table is used for port role selecting.
Port: The logical port for the settings contained in the same row..
Source:
Select mirror mode.
Disabled Neither frames transmitted nor frames received are mirrored.
Both Frames received and frames transmitted are mirrored on the Destination
port.
Rx only Frames received on this port are mirrored on the Destination port.
Frames transmitted are not mirrored.
Tx only Frames transmitted on this port are mirrored on the Destination port.
Frames received are not mirrored
Destination: Select destination port.
This checkbox is designed for mirror or Remote Mirroring.
The destination port is a switched port that you receive a copy of traffic from the
source port.
104
reflector port
are located on this switch.
is located on this switch.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gs-5220-24t4xv

Table of Contents