Table of Contents
Advertisement
5
info@FLIR-Direct.ca
Basic Setup (M5100 Series)
1. HDMI port.
2. VGA port.
5.5 Step 5: Connect the Power Adapter and Power on the DVR
1. Connect the included power adapter to the DC 12V port. Connect the end of the power
adapter to a wall socket or a surge protector.
2. Turn the power switch to ON to turn on the DVR.
At startup, the system performs a basic system check and runs an initial loading sequence.
After a few moments, the system loads a live display view and prompts you to create a
new, secure 6 character password.
5.6 Step 6: Creating a New, Secure Password
When using your system for the first time, you will be prompted to create a new, secure 6
character password.
• Enter a new, secure 6 character password for the DVR and click OK. Record your pass-
word and store it in a secure place, this password will be used to connect to your sys-
tem from now on.
5.7 Step 7: Upgrade Firmware to Latest Version (if Available)
If a firmware upgrade is available, you will be asked to install it once the system starts up.
It is required to upgrade your system firmware and client software or mobile apps to the lat-
est version to enable remote connection to the system.
If a firmware upgrade is available:
1. After startup, a notification will appear asking you to upgrade the firmware. Click OK to
upgrade.
2. Enter the system user name (default: admin) and your new, secure password.
FLIR-DIRECT
#LX400096; r.45547/45547; en-US
.ca
1.800.561.8187
9
Advertisement
Table of Contents
